1. All Products
  2. ETME - Training medical material
  3. (surface control GlowCheck) REFILL SET BO981051
Public Pricelist

(surface control GlowCheck) REFILL SET BO981051

https://unicat.msf.org/cat/product/74457
STD ETMESURC101

Valid Article

18
Shelf life = length of time a product can remain active and effective. Short shelf life = shelf life = < 24 months
CT30
Thermosensitive codes are defined for storage and transportation temperature requirements of the products.
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list

   
Create Cancel

Add Kit To Wishlist

   
Create Cancel

SURFACE CONTROL SET, with UV light (GlowCheck)

Definition

Set with materials for the visual inspection after completion of cleaning and disinfection measures on surfaces by means of UV light.

The system offers various possibilities for invisible marking of surfaces and their subsequent review by UV light.

Specifications

Some restricted information has been hidden. Sign in to see this information

Technical specifications

Complete set contains:

  • 30 ml GlowCheck UV special paint, pump spray
  • 30 ml GlowCheck UV special stamping ink
  • GlowCheck marker
  • GlowCheck automatic temple "HYGIENE CHECK!"
  • 12-LED UV blacklight flashlight
  • Training CD-ROM

Refill set contains:

  • GlowCheck marker
  • 30 ml GlowCheck UV special paint, pump spray
  • 30 ml GlowCheck UV special stamping ink

Instructions for use

Use the special UV colour paint GlowCheck to fill the automatic ink stamp. Pour the colour paint in the vial by means of the pipette system. A few drops to fill the ink pad automatic stamp. Do not use too much colour because it hurts results. The ink pad soaked remains usable for about 1 week before needing to be recharged. To remove the ink pad, exert slight upward pressure on the clear bottom of the automatic buffer. You can now remove the ink pad (black section) by sliding it sideways.

Apply the stamp "HYGIENE CHECK" to the desired location.

Take the UV flashlight. If in doubt, test first on an inconspicuous location if the buffer can remove without leaving residue.

The markings are invisible in normal light but they can be made very light in response to the flashlight 12 LED UV black light.

Image

Precautions for Use

When you want to carry out checks in particularly sensitive sectors concerning hygiene, in which it is essential to avoid transferring germs through the ink stamp, use the bottle with the spray instead of the stamp to apply your markings.

Maintenance

To change the battery, open the flashlight on the side fitted with the loop. If the other end of screw is unscrewed, the electrical contact can be interrupted. If necessary, carefully pull back the top ring over the glass plate.

Storage

  • Protect from freezing.
  • Do not use close to ignition sources.
  • Keep out of reach of children.
  • Shelf life solutions: 18 months
Some restricted information has been hidden. Sign in to see this information