VHF TRANSCEIVER (Icom IC-A25CE) air band + spares
Valid Article
OC subscriptions: included in supply or field order tools (e.g. UniField)
|
|
SC subscriptions: included in supply or field tools
|
|
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)
|
|
VHF TRANSCEIVER (Icom IC-A25CE) air band + spares
Definition
Icom Air Band Radio with Built-in GPS
Specifications
- 6 Watts High RF Output Power
- 2.3 inch Large High Visibility LCD
- "Flip-Flop" Channel Recall
Recall channel screen The IC-A25NE/CE stores the last 10 channels used. You can easily recall those channels by using the directional keys, the channel knoband the 10 keypad. This is convenient for switching between several channels, such as NAV and COM channels. In addition, you can freely edit (replace, delete, change order) the stored recall channels.
Other Features
- IP57 dust-protection and waterproof construction
- Operate with six AA size alkaline batteries with the BP-289 battery case
- BNC antenna
- 121.5 MHz emergency key
- Priority watch
- VFO scan, memory channel scan, priority scan
- ANL (Auto Noise Limiter) for noise reduction
- Side tone function enables you to hear your own voice from an external aviation headset
- Internal VOX capability
- 300 memory channels (in 15 memory groups) with 12 character names
- 8.33 kHz channel spacing
Replaces IC-A6E
Technical specifications
NAV and COM: COM channels only
Frequency range: Tx 118.000–136.992 MHz
Rx 118.000–136.992 MHz
Number of memory channels: 300 channels/15 groups
Channel spacing: 25/8.33 kHz
Type of emission: 6K80A3E, 5K00A3E
Power supply requirement: 7.2 V DC (BP-288), 11.0 V DC (External DC Jack)
Current drain (approximately): Tx High Less than 1.8 A
Rx Max. audio/Stand-by Less than 500 mA
90 mA typ. (GPS, Bluetooth, Light: OFF)
Antenna impedance: 50 Ω
Operating temperature range: −20 °C to +55 °C
Dimensions : 58.9 × 148.4 × 31.8 mm (W × H × D;)
Weight (approximately): 340 g (with BP-288)
Transmitter
Output power (at 7.2 V DC) 6.0/1.8 W (PEP/carrier)
Audio harmonic distortion Less than 10% (at 85% modulation)
Harmonics Spurious emissions Less than −36 dBm
(except operationg frequency ±1 MHz)
Frequency stability ±1 ppm
Receiver
Intermediate frequencies:
Sensitivity: COM 46.35 MHz/450 kHz (1st/2nd)
(12 dB SINAD) Less than 0 dBμ
Squelch sensitivity (at threshold):
Adjacent channel rejection: Less than 0 dBμ (with CCITT filter)
Spurious response
Hum and noise: Less than 0 dBμ
Audio output power
External speaker: More than 60 dB
Internal speaker: More than 70 dB
Ext. speaker connector: More than 40 dB (at 90% modulation)
Measurements made in accordance with EN300 676-2: 530 mW typical (AM 8 Ω/60% Mod at 10% distortion)
All stated specifications are subject to change without notice or obligation:
1200 mW typical (AM 8 Ω/60% Mod at 10% distortion)
3-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω
Dimensions
| Dimensions | 58.9 × 148.4 × 31.8 mm | |
| (W × H × D;) | ||
| Weight (approximately) | 340 g (with BP-288) | |