UPS double conv. (Delta Ultron EH) 15kVA, 3ph/1ph + battery

NST PELEUPSD15US

Discontinued Article

OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list

   

Add Kit To Wishlist

   

UPS double conv. (Delta Ultron EH) 15kVA, 3ph/1ph + battery

Definition

A double conversion uninterruptible power supply (UPS) guarantees a perfect AC supply and is especially suitable for vulnerable and/or expensive equipment such as medical and laboratory equipment.

There is no connection between the incoming power and the outgoing power; all possible electrical problems such as voltage spikes are eliminated.

To function it needs a battery pack, which is included in this article. The autonomy of the "extended" (EXT) version can be increased by placing more battery packs in parallel.

Specifications

  • Input voltage range 100 - 300 V (note that between 100 V and 180 V input voltage, the output power is reduced by 50 - 100%; full power is available only at 180V AC and above). At higher (>300 V) or lower (<100 V) voltages the UPS switches to battery power
  • Input and output frequency 50 or 60 Hz
  • Power factor >0.99
  • Efficiency (full load) >92%
  • Battery cabinet: 20 x 9 Ah, 12 V batteries in one cabinet; energy content approximately 2 kWh.
  • Multiple outputs allow for support of only critical loads.
Some restricted information has been hidden. Sign in to see this information

Instructions for use

This UPS is primarily intended to protect the equipment connected to it. It also provides back-up power but it is limited with only one battery pack. Additional battery pack can be added to give a longer back-up time but the charger is integral and cannot be changed.

The high output power makes it suitable for almost any laboratory or medical facility. The UPS is delivered without a power cord and needs to be wired with an appropriate cable. For more details and advice: contact your logistics department.

Greater inverter power and charging capacity is possible by placing multiple units in parallel.

MSF requirements

The chosen model enables input voltages of 100 – 300 V to be converted to 230 V; the input is compatible with 50 or 60 Hz; the output can be programmed to the local frequency if need be.