1. All Products
  2. PCOL - Cold chain
  3. TEMPERATURE ALARM GSM (Mobeye CML4255) -20/+70°C, 2 sensors
Public Pricelist

TEMPERATURE ALARM GSM (Mobeye CML4255) -20/+70°C, 2 sensors

https://unicat.msf.org/cat/product/87439
NST PCOLMONIGM1-

Valid Article

OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list

   
Create Cancel

Add Kit To Wishlist

   
Create Cancel

TEMPERATURE ALARM GSM (Mobeye CML4255) -20/+70°C + 2 sensors

Form

The Mobeye CML4255 is a remote temperature monitoring device that uses a GSM network SIM card to send and receive alarm messages. It comes with two temperature sensors, so two pieces of cold chain equipment can be monitored e.g. two fridges.

Fit

A Mobeye CML4255 includes the following items:

1. Mobeye ThermoGuard CML4255. Dimensions (94 x 94 x 28 mm) Qty: 1

2. Temperature sensor, 1m long cable, round. Qty: 2

3. Power adapter, 12VDC (500mA). Qty: 1

4. CR123A Lithium battery. Qty: 2

5. Mobeye SIM card (inactivate). Qty: 1

6. Flat extension cable, 1m long. Qty: 2

7. Round extension cable, 10m long. Qty: 1

8. User manual

Notes:

a. The minimum items needed to set up and start using the Mobeye ThermoGuard CML2255 is the CML4255 box, at least one of the two 1m long round sensor cables, a local SIM card and two CR123A lithium batteries. This will allow the CML4255 to be programmed using text messages as explained in the user manual.

b. The flat extension cable is useful to minimise deforming the fridge seal/gasket, comparing with the round cable the sensor is attached to. You just connect the 1m sensor cable to the 1m flat extension cable which plugs into the CML4255 box.

c. The 10m long round cable allows the second sensor to be put in a cold chain equipment some meters away from the CML4255 box.

d. The power adapter is recommended to extend the life of the batteries from 1 year to 3 years, and if you want to use the 'power failure alarm' feature of the Mobeye CML4255.

e. Using the Mobeye SIM card included with this product is optional. It should be tested on one Mobeye CML4255 in your mission if this has not already been done, as it may not work in all countries. Discuss with your LogCo who can ask the LogCell/LogFO or cold chain advisor for advice. Once the Mobeye SIM is activated it allows additional functionality via the Mobeye portal. The user can see a dashboard showing the status & settings, make changes to settings via the portal instead of text message, see a temperature V time graph, review the event history, see network strength, battery status and some more additional features.

f. When using a local SIM card the 2G network is used. The Mobeye must then be programmed by sending SMS messages (see user manual) and the Mobeye portal is not accessible.

Image

Function

The Mobeye ThermoGuard CML4255 is used for remote temperature monitoring by setting lower and upper limits. When the temperature sensor detects a temperature outside these limits an alarm message is sent to the contact(s).

The device can be fully battery powered. When the power adapter is used the batteries give back-up power in the event of a power cut.

The built-in communication module can connect to the 4G LTE-M and the 2G network (back-up).

Sensor accuracy: 0.5°C between -30 °C and +55 °C, 1 °C outside these limits.