1. All Products
  2. MATTRESS, basic, 80x190 cm, high density foam, cover + zip
Public Pricelist

MATTRESS, basic, 80x190 cm, high density foam, cover + zip

https://unicat.msf.org/cat/product/12963
STD EHOEMATT1--

Valid Article

Former Code(s): -X
CE marking: declaration that the product meets EU standards for health, safety, and environmental protection. The CE marking indicates that the product may be sold freely in any part of the European Economic Area, regardless of its country of origin.
I
In Europe, medical material that fulfills the definition of a medical device according to the MDR (Medical Device Regulation) is classified into 4 classes
E
The order of this product needs to be justified and is only acceptable under certain conditions.
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

See Related

Add article to list

   
Create Cancel

Add Kit To Wishlist

   
Create Cancel

MATTRESS, basic, HD foam

Definition

A large, durable, fabric case filled with a resilient material designed to be placed on a bed mattress support platform to provide a comfortable surface on which an occupant can lie and rest/sleep. The device provides no special therapeutic effect.

Specifications

Density of foam is the weight of one cubic foot (=28.3 liter) of foam (= PCF) or the weight of one cubic meter (kg/m3). Density differs as a result of the materials used in the foam construction, and the amount of polymers versus air present in the product. The common range of densities for conventional foam (does not apply to memory foam) can vary by brand.

Lower density foams (< 25 kg/m³) are cheaper to produce because they require less material.

Density is an important indicator of foam performance with regard to comfort, support and durability.

Type of foam

Density kg/m3

Density / lbs/ft³ or PCF​

Use

Low density foam (e.g. conventional polyfoam)

<25

<1.5

child mattress

High density foam (e.g. polyurethane, latex)

25 - 60

1.5-3.5

normal adult mattress

Memory foam

>75

4-6

pressure relief mattress

Technical specifications

Mattress

  • Type of foam: polyurethane, high density foam: > 29 kg/m³
  • Size: +/- 80 x 190 x 14 cm
  • Weight: +/- 10 kg
  • Convenient for patients with a bodyweight < 100 kg, able to mobilize alone without problem

Protective cover

  • 65% polyurethane, 35% polyester
  • with zipper closure on 3 sides
  • weight : 140 g/m2
  • impervious to liquids
  • permeable to water vapour

Instructions for use

Precautions for Use

Regularly check the general condition of the cover (perforations, abrasion ...) and no longer use the cushion if the cover has a defect. Do not use a mattress with a wet or poorly dried cover.

The sterilization of the cover is strongly discouraged and could damage it.

Maintenance

At the change of patient (non-infectious), clean the surface of the cover with a detergent/disinfectant for surfaces/non-invasive medical equipment. Prepare use-solution in concentration required. Always read the label and product information before use. Do not mix with other products. Make sure to wet the surfaces completely, use a wipe or towel, keep them wet for the whole exposure time.

MSF requirements

Regular mattress for a hospital bed for patients that are able to mobilize alone without problem

Some restricted information has been hidden. Sign in to see this information