PIPETTE, plastic, graduated, cotton stopper, sterile 5 ml


Valid Article

Former Code(s): ELAEPIPC005
The product is supplied (and stored) sterile, it must remain sterile until its use. Sterile = state of being free from all living microorganisms.
Single use
A single-use device, also referred to as a disposable device, is intended for use on one patient during a single procedure. It is not intended to be reprocessed (i.e., cleaned and disinfected or sterilized).
CE marking: declaration that the product meets EU standards for health, safety, and environmental protection. The CE marking indicates that the product may be sold freely in any part of the European Economic Area, regardless of its country of origin.
W050302010102 - Serological and dilution pipettes, plastic
European Medical Device Nomenclature (EMDN) is the nomenclature of use by manufacturers when registering their medical devices in the EUDAMED database. EMDN is characterised by its alphanumeric structure that is established in a seven-level hierarchical tree.
The order of this product needs to be justified and is only acceptable under certain conditions.
Thermosensitive codes are defined for storage and transportation temperature requirements of the products.
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list


Add Kit To Wishlist


PIPETTE, plastic, graduated, cotton stopper,sterile


Graduated tapered tube used to transfer a measured volume of liquid.



  • Pipette with nozzle: polystyrene crystal
  • Cotton plug: 100% pure medical coton

Technical specifications

  • Precision ±1%
  • Sterile, for single use
  • With cotton stopper
  • Free of detectable DNase/RNase, human DNA, pyrogens, PCR inhibitors and endotoxins
  • Non cytotoxic
  • Zero marked on the top
  • Graduated:
    • 0.01 ml for 1 and 2 ml pipette
    • 0.1 ml for 5 and 10 ml pipette
  • Negative graduation for measurement of remaining or delivered liquid


Average length:

  • 279 mm for 1 and 2 ml pipette
  • 275 mm for 5 ml pipette
  • 333 mm for 10 ml pipette

Packaging & Labelling

Individual sterile packaging in peel-open pack (plastic/paper)

(Cf Introduction: Packaging and labelling)

Instructions for use

Precautions for Use

Never pipette by mouth! Use Pi-pump® models or Easypet® (see related articles).


Store between 0°C and 40°C

Waste management

When pipette is used for contaminated material (e.g. sediment from sputum), reinsert the pipette in its single packaging and place in dry waste container in the BSC. Autoclave before disposal out of the laboratory area.

MSF requirements

Sterile pipette in individual packaging. Individual packaging that could be used for safer disposal of the pipette after use.

Reserved for laboratories performing PCR (e.g. HIV viral load), or microbiology programmes (TB culture and bacteriology).

Some restricted information has been hidden. Sign in to see this information