KIT ANGLE GRINDER Ø125mm + accessories

https://unicat.msf.org/cat/product/15523
STD KPROKTOOGR1

Valid Article

OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list

   

Add Kit To Wishlist

   

KIT angle grinder Ø125mm + accessories

Definition

Electrical equipment used to cut, grind, trim and polish. Delivered with various disks for different works.

Indications

Angle grinder for disks with a diameter of 125 mm, wired with plug type E.

  • Power supply 230 V, 50 Hz
  • Minimum capacity 800 W
  • handle can be installed both on right and on left hand side
  • Variable protective casing

Delivered with:

  • Set of disks to cut metal
  • Set of disks to trim metal
  • Set of flapped disks to brush or polish metal
  • Metal wire brush
  • Protection goggles and gloves
  • Extension cable 10 metre, 3 x 2.5 mm2 with European plug

Instructions for use

An angle grinder is a dangerous tool.

  • Always wear work gloves and protective goggles.
  • Never remove the protective casing, but adapt it depending on the rotation direction of the grinder.
  • Never use a damaged disk.
  • Always switch the machine off and systematically unplug the machine before changing the disk.
  • Use the appropriate type of disk required depending on the material you are working on (steel, stone etc.).
  • Adapt the working environment, making sure no-one is exposed unnecessarily to potential risks.
Some restricted information has been hidden. Sign in to see this information