PEPTIDASE, 30ml, bot. (MicroScan B1012-30B)

STD SLASPEPD1B3

Valid Article

CE marking: declaration that the product meets EU standards for health, safety, and environmental protection. The CE marking indicates that the product may be sold freely in any part of the European Economic Area, regardless of its country of origin.
12
Shelf life = length of time a product can remain active and effective. Short shelf life = shelf life = < 24 months
W0104080208 - Single tests (discs, strips, droppers...)
European Medical Device Nomenclature (EMDN) is the nomenclature of use by manufacturers when registering their medical devices in the EUDAMED database. EMDN is characterised by its alphanumeric structure that is established in a seven-level hierarchical tree.
The order of this product needs to be justified and is only acceptable under certain conditions.
Thermosensitive codes are defined for storage and transportation temperature requirements of the products.
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

See Related

Add article to list

   

Add Kit To Wishlist

   

PEPTIDASE

Definition

Reagent used for peptidase test on MSF NEG/POS ID PANEL type 2

Specifications

Some restricted information has been hidden. Sign in to see this information

Technical specifications

Components:

  • Methoxyethanol 1.5ml
  • Dimethylformamide 0.6 ml
  • Acetic Acid 0.75 ml
  • p-Dimethylaminocinnamaldehyde 0.004 g
  • Lauryl Sulfate, Sodium Salt 0.75 g

Appearance: yellowish clear liquid

Packaging & Labelling

1 glass vial 30 ml

Instructions for use

  • 2 drops of Peptidase reagent are added to PYR well before reading
  • Reagent to be used with MicroScan Dried ID panels (see related articles)

Please consult the “Bacteriology laboratory procedures and resources” available online via the Laboratory working Group sharepoint page: Laboratory Procedures and Resources

https://msfintl.sharepoint.com/sites/msfintlcommunities/LabWG/SitePages/Bacteriology-Laboratory-Resources.aspx

For offline access, contact your laboratory advisor

Some restricted information has been hidden. Sign in to see this information

Storage

  • Keep refrigerated between 2ºC and 8ºC
  • Do not freeze
  • Shelf life: 12 months
  • Guaranteed minimum remaining shelf life at delivery: 1/3 of total shelf life

(Cf Introduction: Thermosensitive products)

Waste management

Substance with hazardous characteristics. Please contact your watsan referent for advice on proper disposal.

Detailed hazard and precautionary information can be found in the safety data sheet (SDS).

Classification EC Regulation N° 1272/2008

  • Skin Irritation, Category 2, H315
  • Toxic to Reproductive, Category 1B, H360
  • Eye Irritation, Category 2, H319

Signal Word

Danger

Image Image
H315Causes skin irritation
H319Causes serious eye irritation
H360May damage fertility or the unborn child (state specific effect if known) (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard)
P405Store locked up.
P201Obtain special instructions before use.
P280Wear protective gloves/protective clothing/eye protection/face protection
P362Take off contaminated clothing and wash before reuse
P302 + P352IF ON SKIN: wash with plenty of soap and water
P305 + P351 + P338IF IN EYES: rinse cautiously with water for several minutes. If the victim wears contact lenses, remove them if possible. Keep rinsing
P308 + P313IF exposed or concerned: Get medical advice/attention.
P332 + P313If skin irritation occurs: get medical advice/attention
P337 + P313If eye irritation persists: get medical advice/attention
P501Dispose of contents/container to location in accordance with local and regional/ national/ international regulations
P362 + P364Take off contaminated clothing and wash it before reuse.

MSF requirements

Reserved for projects using the Mini-Lab

Some restricted information has been hidden. Sign in to see this information