MATTRESS, polyfoam with fixed cover 65x35x7cm
Valid Article
MATTRESS, polyfoam, with fixed cover
Definition
A durable, fabric case filled with foam, designed to be placed in a baby crib to provide a comfortable surface on which the baby can rest and sleep, and intended to distribute body weight over a large surface area. It may contain weight-distribution air cells. This is a reusable device.
Specifications
Density of foam is the weight of one cubic foot (=28.3 liter) of foam (= PCF) or the weight of one cubic meter (kg/m3). Density differs as a result of the materials used in the foam construction, and the amount of polymers versus air present in the product. The common range of densities for conventional foam (does not apply to memory foam) can vary by brand. Lower density foams (< 25 kg/m³) are cheaper to produce because they require less material.
Technical specifications
Mattress
- Type of foam: polyfoam low density: 21 kg/m³
- Weight: +/- 10 kg
Protective cover
- antistatic
- flexible, highly tear resistant
- liquid proof (not waterproof because of the sewings)
- flame retardant
- washable at 95°C
- autoclavable
- weight: 190 g/m3
Size:
- +/- 65 x 35 x 7 cm
Instructions for use
Precautions for Use
Regularly check the general condition of the cover (perforations, abrasion ...) and no longer use the cushion if the cover has a defect. Do not use a mattress with a wet or poorly dried cover.
The sterilization of the cover is strongly discouraged and could damage it.
Maintenance
At the change of patient (non-infectious), clean the surface of the cover with a 0.25 % detergent-disinfectant solution for surfaces (i.e. 20 ml = 1 sachet = 1 stroke of dosing pump for 8 litres water). Do not rinse (contact time must be minimum 15 minutes and the product is not corrosive).
MSF requirements
Regular mattress for a classical neonatal bed for babies.