TOURNIQUET, pneumatic, ARM-CUFF + MANOMETER + LEG CUFF

STD EANETOUR2I-

Valid Article

Former Code(s): -X
CE marking: declaration that the product meets EU standards for health, safety, and environmental protection. The CE marking indicates that the product may be sold freely in any part of the European Economic Area, regardless of its country of origin.
Z12139006 - Pneumatic tourniquets
European Medical Device Nomenclature (EMDN) is the nomenclature of use by manufacturers when registering their medical devices in the EUDAMED database. EMDN is characterised by its alphanumeric structure that is established in a seven-level hierarchical tree.
In Europe, medical material that fulfills the definition of a medical device according to the MDR (Medical Device Regulation) is classified into 4 classes
The order of this product needs to be justified and is only acceptable under certain conditions.
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

See Related

Add article to list

   

Add Kit To Wishlist

   

TOURNIQUET, pneumatic

Definition

Broad band of fabric with inflatable bladder, connected on one side to an inflation bulb, and on the other side to a manometer for measuring the pressure.

Wrapped around a limb and inflated, this device allows to reduce or totally occlude circulation in order to carry out some surgical gestures or an intravenous loco-regional anaesthesia.

Specifications

Components

  • 1 arm cuff
  • 1 leg cuff
  • 1 hand pump
  • 1 manometer with tubing and connectors
Image

Quality standards

BS 7088, 2021, edition 89, Specification for Pneumatic tourniquet equipment

Technical specifications

  • Arm and leg cuff:
    • Broad band of washable gabardine
    • Velcro fastening
    • Arm cuff dimensions: ± 100 x 9 cm
    • Leg cuff dimensions: ± 140 x 10 cm
    • Internal inflatable rubber bladder
  • Manometer:
    • Case made of ABS with alloy aluminium bottom
    • Dial with analogical pressure display
    • Graduations in mm or cm Hg, from 0 to 600/700 mm (or from 0 to 60/70 cm) of Hg
    • Connected to the arm cuff and the leg cuff by a rubber tube

Instructions for use

Before use

  • Check the bladder positioning into the cuff (PATIENT SIDE) before placing the tourniquet on the patient's limb.
  • Check the velcro fastening (if needed, add an elastic bandage).
  • Check that the bulb and the manometer function properly.
  • Check the pressure gauge of the manometer.

Operation of the tourniquet:

  • close the release valve by turning it clockwise
  • screw tube connector at the end of the cuff tube into the tube socket on the manometer housing

Applying the cuff:

  • Place the cuff around the respective limb and tighten the straps on the cuff by pulling them through the metal buckles
  • the tube exit should be approx. in the centre of the limb to be treated.

Operating the pump:

  • hold the pump in one hand and, using the other hand, carefully pull the air pipe of the pump on the black plastic ball (3.9.) up to the stop and then push it back into the valve.
  • Repeat the pumping action until the manometer scale shows the desired value.
    • to restrict blood circulation to the arm: +/- 250 mm Hg
    • to restrict blood circulation to the leg: +/- 550 mm Hg
  • the pressure which the manometer shows must be continuously supervised during application and, if necessary, be corrected by after-pumps.

Precautions for Use

Should only be used by experienced staff (the tourniquet should be properly applied, the time of installation should be noted, the appropriate pressure for arms and legs should be respected).

Inflation time should be kept to a minimum to minimize risks to the patient

Avoid tube clamping with traumatic forceps of Kocher type. If the valves are working well and the tourniquet is well applied, clamping is unnecessary, and even harmful.

Maintenance

Must be cleaned with soapy water after each use and kept in good working order.

Some restricted information has been hidden. Sign in to see this information
Some restricted information has been hidden. Sign in to see this information