SWR METER, UHF + 0.5m Aircell coaxial cable

STD PCOMUHFA0SS5

Valid Article

Former Code(s): PCOMANTASWU
The product is part of at least one Kit. A kit is a collection of products (medical and/or logistic) that are needed for a certain intervention in emergency. The choice and quantity of the articles reflects the MSF protocols for this specific situation. The use of Kits allows to start an intervention without a detailed evaluation.
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

See Related

Add article to list

   

Add Kit To Wishlist

   

SWR METER, UHF + 0.5m Aircell coaxial cable

Definition

Measuring device which is placed between a radio and its antenna and which indicates the SWR (standing wave ratio), i.e. the ratio between the FORWARD POWER (from the radio to the antenna) and the REFLECTED POWER (from the antenna to the radio).

The SWR indicates whether the antenna is properly tuned to the frequency being used, so enabling evaluation of the radio's transmission quality.

The SWR must always be under 3 to avoid burning out the radio.

Specifications

  • MSF standards: Daiwa CM-460
  • Frequency: 440 - 470 MHz, for UHF radio
  • Power range: 15 / 150 / 1500 W
  • Input/output impedance: 50 ohms
  • Input/output sockets: UHF PL, female
  • Dimensions: 15.5 x 8 x 10 cm
  • Weight: 670 g
  • Supplied with an Aircell 5 cable, 50 cm long + UHF PL male connectors

Instructions for use

You are recommended to instal an SWR meter permanently on every base station in order to monitor the installation's quality, but the device is too fragile to be installed permanently in a vehicle.

It can also be used to check the power of a radio.

Use of the SWR meter

When transmitting, the left-hand needle indicates the FORWARD POWER, while the right-hand needle indicates the REFLECTED POWER.

The intersection of the needles indicates the SWR.

Reading the measurements

  • The SWR VALUE can be read on the scale at the intersection of the two needles.
  • The FORWARD POWER can be read on the left-hand scale. A button allows any of 3 ranges to be selected depending on the power on the transceiver:
    • the upper range of 1500 W maximum
    • the medium range of 150 W maximum
    • the lower range of 15 W maximum
  • The REFLECTED POWER can be read on the right-hand scale.

Interpreting the measurements

  • The higher the forward power, the better communication will be.
  • The lower the reflected power, the less risk there is of burning out the radio.
  • The reflected power is dissipated in the radio and can burn it out if it is too high. This is why the SWR must be less than 3. It is also the reason why you should never transmit without an antenna.

CAUTION

If the SWR exceeds 3, stop transmitting immediately and check the installation or inform the logistician in charge of the radio!

(SWR = between 3 and ∞ => destruction of the radio)

Some restricted information has been hidden. Sign in to see this information