CHARGER + INVERTER SET separate devices, 1200W + switch box
Valid Article
SET BATTERY CHARGER/INVERTER
Definition
Set of a battery charger, an inverter and a switch box that combined provides a charger/inverter function, automatic, with constant output power.
Synonym
combi
Specifications
- Overcharge protection
- Input voltage:
- 9.5 - 16 V DC
- 190 - 255 V AC
- Output power: 1200 W
- Peak output power: 1400 W for 30 minutes max.
- Consumption on standby: 8 W
- Sine wave
- Switch-over time (from inverter to charger and vice versa) < 20 microseconds
- Internal temperature sensor
Instructions for use
Calculate the power and do not overload the device.
The temperature sensor reduces the charging voltage when the temperature increases.
This charger/inverter set is not equipped with a voltage limiter. It is therefore essential to install an external voltage limiter on the input side to protect the devices connected to the charger/inverter (see "Related Articles" below).
If the input voltage is too low or too fluctuating, you are recommended to install a voltage regulator/stabilizer (see "Related Articles" below).
Check the polarity!
Always connect the RED cable to the "+" terminal and the BLACK cable to the "-" terminal.
Note
This 'combi' consists of three components that can be ordered or replaced seperately. For more info, please contact your technical department.
MSF requirements
Three stage charger.