COUPLING flexible riser pipe, stainless steel, 40mm

NST CWATBORELC2

Valid Article

Former Code(s): CWATZTF0899
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list

   

Add Kit To Wishlist

   

COUPLING flexible riser pipe, stainless steel, 40mm

Form

40mm Boreline coupling made out of stainless steel comprised of a coupling body and two outer fastening rings.

The coupling body is grooved on one end and male threaded on the other. The rings are divided into three equal parts.

Per piece.

Fit

The coupling body is grooved on one end which the 40mm hose fits and into which the rings tightened.

40 mm male thread for attachment to the pump on the other end.

Image

Function

Used to securely connect the Boreflow hose to a submersible pump or to the well head within boreholes.

Attaching the Boreline fitting and riser to the pump:

  • Make sure the ends of the riser are cut square.
  • Screw the Boreline fitting into the check-valve located at the top of the pump.
  • Push the hose over the fitting body.
    Note: Do not use lubricant. (Dipping the end of the Boreline in hot water)
  • Fit the first ring, with the three segments, into the groove closest to the threaded end of the fitting body. Tighten all three screws evenly, ensuring the gaps between the segments are even.
  • Fit the second ring into the second groove, positioning the gaps off-centre to the gaps of the first ring. Tighten the rings as explained above.