(borehole) CASING thr. MxF, PVC, 4"½ 125x113mm NP12.5, 3m

NST CWATBOREO5C3

Valid Article

OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

See Related

Add article to list

   

Add Kit To Wishlist

   

(borehole) CASING thr. MxF, PVC, 4"½ 125x113mm NP12.5, 3m

Form

Borehole PVC casing, nominal diameter 4"1/2, with a threaded male connection on one end and a female threaded connection on the other. Should be drinking water quality.

  • Length: 3m
  • Inner diameter: 113mm
  • Outer diameter: 125mm
  • Nominal pressure: NP12.5
  • Non-screened tube

Usually blue.

Per piece.

Fit

To be screwed onto 4"1/2 threaded coupling male on one end, female on the other. Several types of thread are available. (Gas thread ‘withworth', Trapezoidal thread)

The thread does not require the use of sealants (mastic, glue, tow, etc.).

Image

Function

As the risk of collapse can be significant, the casing is put in place as quickly as possible.
The casing or catchment plan (length and position of the solid tubes and strainers) is established according to the geological section of the borehole where the different “layers” of land and the inflows of water are noted, observed visually during the drilling and through sampling.

​In order to guarantee a good positioning of the tubes in the hole and therefore a good distribution of the filter mass around the strainers, it is recommended to instal centering devices around the tubes.

For more information see: "Water, Hygiene and Sanitation for populations at risk". Action against Hunger. Chapter 8 drilling.