CHARGER-INVERTER (Victron Multiplus Compact) 12V/70A/1600W

NST PELECHIN7126N

Valid Article

OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Documents See Related

Add article to list

   

Add Kit To Wishlist

   

CHARGER-INVERTER (Victron Multiplus Compact) 12V/70A/1600W

Definition

Victron Multiplus Compact charger-inverter 12V, 70A, 1600W is a combination of 12V 1600W inverter and battery charger. The integrated battery charger provides 70A which allows quick charging even for bigger batteries as long as there is a grid connection.

The 12V sine inverter converts your DC battery current into a 230V AC current. Thanks to a pure sine wave this inverter is also suitable for sensitive electronic devices.

Features:

  • True sine wave inverter
  • Adaptive charging
  • Hybrid PowerAssist technology
  • Unique PowerAsist feature with overload prevention of a limited AC source and AC power boost with power taken from the battery
  • Uninterupted AC power (UPS Function)
  • Virtual unlimited power in parallel operation
  • Remote Monitoring and Control

Notes:

  • Protection key: a) output short circuit, b) overload, c) battery voltage too high, d) battery voltage too low, e) temperature too high, f) 230 VAC on inverter output, g) input voltage ripple too high
  • Non-linear load, crest factor 3:1 @ 25˚C ambient
  • Switches off when no external AC source available
  • Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function, AC rating: 230 V/4A, DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC

Specifications

FUNCTIONS:

  • PowerControl: Yes
  • PowerAssist: Yes
  • Transfer switch (A): 16

INVERTER

  • Input voltage range (V DC) 9,5 – 17 V
  • Output Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1)
  • Cont. output power at 25°C (VA): (3) 1600
  • Cont. output power at 25°C (W): 1300
  • Cont. output power at 40°C (W): 1200
  • Cont. output power at 65°C (W): 800
  • Peak power (W): 3000
  • Maximum efficiency (%): 93 / 94
  • Zero load power (W): 8 / 10
  • Zero load power in AES mode (W): 5 / 8
  • Zero load power in Search mode (W): 2 / 3

CHARGER

  • AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1
  • Charge voltage 'absorption' (V DC) : 14,4
  • Charge voltage 'float' (V DC) : 13,8
  • Storage mode (V DC) : 13,2
  • Charge current house battery (A)(4): 70 / 40
  • Charge current starter battery (A): 4 (12 V and 24 V models only)
  • Battery temperature sensor: yes

GENERAL

  • Auxiliary output (5): n. a.
  • Programmable relay (6) Yes
  • Protection (2): a - g
  • VE.Bus communication port: For parallel and three phase operation, remote monitoring and system integration
  • General purpose com. Port: n. a.
  • Remote on-off: Yes
  • Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95%

ENCLOSURE

  • Common characteristics material & colour: aluminium (blue RAL 5012) Protection category: IP 21
  • Battery-connection battery cables of 1.5 meter
  • 230 V AC-connection: G-ST18i connector spring-clamp

Norms

  • Safety EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1
  • Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3

Dimensions

  • Dimensions: 37.7 x 21.4 x 11 cm
  • Weight: 10 kg
  • Closed item. Per piece

Instructions for use

Read manual before use and installation. Further support documention, including back-up sizing, can be found on your logistical knowledge base. Working with electricity can be dangerous installation and programming should be done by qualified persons.

Some restricted information has been hidden. Sign in to see this information