1. All Products
  2. PSAF - Safety and protective equipment
  3. AUTONOMOUS WARNING SMOKE DETECTOR, 10 years battery life
Public Pricelist

AUTONOMOUS WARNING SMOKE DETECTOR, 10 years battery life

https://unicat.msf.org/cat/product/78216
NST PSAFALARSDA

Valid Article

OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Add article to list

   
Create Cancel

Add Kit To Wishlist

   
Create Cancel

AUTONOMOUS WARNING SMOKE DETECTOR, 10 years battery life

Form

Autonomous warning smoke detector. This thermal detector allows reliable detection of flaming fires. It is equipped with a pause button for locations prone to false alarms.​

Features:

  • power supply: sealed lithium battery
  • 2 batteries: 1 for the detector and another independent battery for the radio transmitter
  • battery life 10 years
  • interconnection up to 50 devices in a single network
  • frequency band: 868 MHz frequency band
  • range: 35 m maximum
  • low battery warning
  • test button
  • mounting plate
  • conform to european smoke alarm standard: EN14604:2005

Per piece.

Image

Fit

To be attached to a wall or ceiling.

It can be connected with other similar smoke detectors or the PSAFALARHR1 heat detector. Whenever one of the smoke or heat detector in the network detects smoke or heat, all the detectors sound their alarm.

Location of detector:

  • do not install heat alarms on walls.
  • do not locate near fans or extractors; these can pull smoke and heat away from the alarm
  • do not install in bathrooms and showers
  • do not install in rooms where the normal temperature may exceed 40 °C or fall below 0 °C. These may cause nuisance alarms.
  • do not install in the peak of an A frame ceiling, this may delay heat reaching it due to still air (see diagram above for minimum distances from the peak)
  • do not install less than 300 mm from walls and beams due to still air
  • do not install less than 300 mm from light fittings
  • do not install heat alarms in sleeping areas such as bedrooms, nurseries, playrooms or areas where the elderly and disabled may spend long periods of time
  • do not install on poorly insulated ceilings where cold air boundary layers may delay heat from reaching the alarm
  • do not install near objects that may delay or prevent heat from reaching the alarm
  • avoid installing within 1500mm of fluorescent light fittings that could cause nuisance alarms
  • do not paint the alarm
Image

Function

This autonomous, optical smoke detector is for sensing smouldering fires and are therefore best suited for rooms containing furniture, bedding and clothes such as escape routes, lounges, bedrooms and other living rooms.