POWER LOGGER (Fluke-1732/EUS) 3 phase

NST PELEMEASA3F2

Valid Article

Hazardous materials and products (identified by their 4-digit transport UN-number) must be transported under certain conditions as specified in the MSDS sheet (Material Safety Data Sheet).
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)

This combination does not exist.

Documents See Related

Add article to list

   

Add Kit To Wishlist

   

POWER LOGGER (Fluke-1732/EUS) 3 phase

Definition

Automatically capture and log voltage, current, power, power factor, energy and associated values.

The Fluke 1732 Three Phase Electrical Energy Loggers deliver easy to use three phase power measurement data for discovering sources of electrical energy waste, overloaded circuits and help you perform routine load studies. Discover when and where energy in your facility is being consumed - from the service entrance to individual circuits.

Synonym

Energy logger

Specifications

600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream.

Notable specifications follow. For complete specifications please refer to manufactures website or online documentation.

Measurement

Parameter

Range

Resolution

Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)

Voltage

1000 V

0.1 V

±(0.2% + 0.01%)

Current with i17xx-flex 1500 12"

150 A

0.1 A

±(1% + 0.02%)

1500 A

1 A

±(1% + 0.02%)

Frequency

42.5 Hz to 69 Hz

0.01 Hz

±(0.1%)

Auxiliary input

±10 V dc

0.1 mV

±(0.2% + 0.02%)

Voltage min/max

1000 V

0.1 V

±(1% + 0.1%)

Electrical Specifications

Power Supply

Voltage range

100 V to 500 V using safety plug input when powering from the measurement circuit

100 V to 240 V using standard power cord (IEC 60320 C7)

Power consumption

Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)

Efficiency

≥ 68.2% (in accordance with energy efficiency regulations)

Maximum no-load consumption

< 0.3 W only when powered using IEC 60320 input

Mains power frequency

50/60 Hz ±15%

Battery

Li-ion 3.7 V, 9.25 Wh, customer-replaceable

On-battery runtime

Four hours in standard operating mode, up to 5.5 hours in power saving mode

Charging time

< 6 hours

Data Acquisition

Resolution

16-bit synchronous sampling

Sampling frequency

10.24 kHz at 50/60 Hz, synchronized to mains frequency

Input signal frequency

50/60 Hz (42.5 to 69 Hz)

Circuit types

1-φ, 1-φ IT, Split phase, 3-φ delta, 3-φ wye, 3-φ wye IT, 3-φ wye balanced, 3-φ Aron/Blondel (2-element delta), 3-φ delta open leg, Currents only (load studies)

Data storage

Internal flash memory (not user replaceable)

Memory size

Typical 10 logging sessions of 8 weeks with 1-minute intervals and 500 events¹

¹The number of possible logging sessions and logging period depends on user requirements.

Basic Interval

Measured parameters

Voltage, current, aux, frequency, THD V, THD A, power, power factor, fundamental power, DPF, energy

Averaging interval

User selectable: 1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min

Averaging time min/max values

Voltage, Current: Full cycle RMS updated every half cycle Aux, Power: 200ms

Demand Interval (Energy Meter Mode)

Measured parameters

Energy (Wh, varh, VAh), PF, maximum demand, cost of energy

Interval

User selectable: 5 min, 10 min, 15 min, 20 min, 30 min, off

USB-A

File transfer via USB flash drive, firmware updates
Max. current: 120 mA

WiFi

File transfer and remote control via direct connection or WiFi infrastructure*

*1732 requires a USB adapter it is not inbuilt

Components

Supplied with i17xx-flex 1500 12" rogowski coils for contact free current measurement.

Instructions for use

Current sensing coils are placed around the conductors where the load is to be measured. To measure voltage and get accurate energy consumption data alligator clips must be attached to the appropriate phase.

Details are included in the manual and supplemental information in your knowledge base.

Image

Precautions for Use

To be used by qualified personal only. Instal sensors when conductors are dead whenever possible. When working with our near live conductors ensure proper protective equipment is worn and all precautions are followed.

Some restricted information has been hidden. Sign in to see this information