PHOTOCOPIER small (HP LJ 400 pro)

Simple and light laser photocopier/scanner, intended for emergencies, for new missions or for offices making a maximum of 200 copies per month.

open article

for example HP LaserJet Pro 400

• Copies onto A4 paper
• 6.5 copies/minute
• Zoom: 25 - 400%
• Scanner
• Copies onto paper, transparencies, labels, tracing paper
• Paper weight: 50 - 128 g/m²
• Power consumption: 10 W on standby, 1032 W maximum
• Lifespan: 50000 copies.
• Cartridge lifespan: 2500 A4 copies (6% black)
• Drum lifespan: 12000 copies
• Supplied with 2 spare cartridges and 1 spare drum

Supplied with FR/EN instructions.

The paper must be dry and cold.

If transparencies are used, they must be of good quality and heat-resistant.

If labels are used, they must be of good quality and designed for photocopiers (if not, there is a danger that they will come unstuck).

A photocopier is a very fragile machine. To prevent any damage, you should:

• never move it when it is warm
• never move it with its toner cartridge inside
• always install the voltage limiter supplied as part of the module, as well as a voltage regulator/stabiliser if the input voltage is too low or fluctuates too much (see "Related Articles" below)
• protect the photocopier from dust and humidity by covering it when not in use
• let it cool down after 15 minutes of uninterrupted use (± 100 copies) before making further copies
• avoid exposing it to direct sunlight.

Lightweight: can be carried by one person.

No routine maintenance apart from replacement of the toner cartridge and the image drum.