WATER TEST LAB E.Coli & Coliform (Faircap) portable, 40tests
Valid Article
WATER TEST LAB E.Coli & Coliform (Faircap) portable, 40tests
Form
The water testing lab is made out of:
- a portable USB powered incubator
- a small reusable plastic concentrating disk
- 40 paper filters of 0.45 micron / 47 mm diameter (CWATTEST0CFM)
- 40 E.coli and Coliform compact dry plastic petri dishes (CWATTESTW5C4)
- a 50 ml syringe
- a pair of tweezers
On the outside of the incubator there is a digital temperature control an electric heating pad and a USB charging port, a USB-cable is included.
- size: 26 cm x 18 cm
- weight: 300 g
- capacity: 18 plates
- temperature: 38-42 degrees C.
- power: 5.5 v / 2.5 Watts per hour
- controller: digital thermostat (+/- 2 degrees)
Open article: FairCap portable lab. Per set.
Fit
The incubator can be used and turned on by connecting it to any USB power source.
Function
The water testing lab can be used to test fecal contamination in water samples.
The portable incubator keeps the E.coli compact dry plates at an average temperature of 38 to 42 degrees for 14 to 16 hours for E.coli and Coiforms colonies to become visible to the nacked eye.
To perform the test properly, you will need to add some alcohol, tissues and a thin point marker.
It can perform/incubate 18 water tests at a time, thus incubate 18 compact dry petri dishes in one cycle.
The kit has enough reagents (paper filters and compact dry petris) to perform 40 tests in total. If additional tests are needed, additional 0.45micron / 47mm diameter paper filters (CWATTEST0CFM) and E.coli and Coliform compact dry plastic petri dishes (CWATTESTW5C4) can be ordered separately.