MODULE, DOSING PUMP, 10 l/h - 3 m³/h (Dosatron)
STD
KWATMDOS01-
Valid Article
Account code:
61110
HS Code:
841391
Last Updated on:
07/11/2024, 16:31:02
Former
Code(s):
-X
MODULE, DOSING PUMP, 10 l/h - 3 m³/h (Dosatron)
Definition
Mechanical dosing pump allowing continuous chlorination of water.
Indications
DOSING PUMP
- Mechanical pump using the water pressure as a driving force (no need for electric power supply)
- Water flow between 0.7 and 18 m3/h with a by-pass assembly
- Maximum nominal pressure: 5 bar
KIT
The kit contains all the accessories required for the functioning and maintenance of the dosing pump.
Instructions for use
- Connect the dosing pump either to the public water supply system or to another water supply source (refer to the user guide supplied by the manufacturer)
- Connect the dosing pump in the same direction as the water flow (see arrow on the Dosatron and on the regulator)
- Always install the dosing pump on the discharge outlet of the pump
- For the first use, start the pump and regulate the flow gradually
- Adjust the positioning of the regulator's spring in order to adapt the opening of the valve according to the flow in your water pipe (refer to the adjustment graph)
- Adjust the percentage of sucked up chlorine stock solution with the graduated dosing ring and test free residual chlorine at the outlet of the system
- To clean the filter: decrease the flow of the pump and then put the filter on the filtering position
- Clean the pump once a month by allowing it to suck up water without chlorine during 10 minutes
- Protect the pump from the bad weather and sun
Some restricted information has been hidden. Sign in
to see this information